Jumper VCC <b>Supply Symbols</b><p> GND, VCC, 0V, +5V, -5V, etc.<p> Please keep in mind, that these devices are necessary for the automatic wiring of the supply signals.<p> The pin name defined in the symbol is identical to the net which is to be wired automatically.<p> In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p> <author>Created by librarian@cadsoft.de</author> >VALUE <b>SUPPLY SYMBOL</b> <b>Jumpers</b><p> <author>Created by librarian@cadsoft.de</author> <b>JUMPER</b> >NAME >VALUE >NAME >VALUE <b>JUMPER</b> GND <b>Jumpers</b><p> <author>Created by librarian@cadsoft.de</author> <b>JUMPER</b> >NAME >VALUE <b>EAGLE Design Rules</b> <p> Die Standard-Design-Rules sind so gewählt, dass sie für die meisten Anwendungen passen. Sollte ihre Platine besondere Anforderungen haben, treffen Sie die erforderlichen Einstellungen hier und speichern die Design Rules unter einem neuen Namen ab. <b>EAGLE Design Rules</b> <p> The default Design Rules have been set to cover a wide range of applications. Your particular design may have different requirements, so please make the necessary adjustments and save your customized design rules under a new name.